How to e-clean your Kangen K8

Quick step-by-step guide on how to clean your Kangen water system - 8 mins

For optimal Kangen water system performance it is wise to "e-clean" your Kangen system at least once/month (based on modest use for a family of 5) or clean fortnightly for heavier use.

E-cleaning breaks down calcium buildup on the platinum-coated titanium electrolysis plates using citric acid.

How to Clean Your Kangen Water Machine: A Step-by-Step Guide

Maintaining the performance and longevity of your Kangen Water Machine is crucial, especially if you rely on it daily for clean and healthy water. Today, I'm going to walk you through the process of cleaning your Kangen K8 machine using the e-clean method. This simple yet effective routine ensures your machine continues to operate efficiently, providing you with the best quality water.

Getting Started

First, navigate to your machine's menu and select Settings > E-Cleaning. When prompted, confirm to proceed with the instructions. You'll need two packets of cleaning powder (citric acid powder), which should come with your Kangen system, a cleaning tank, and a cleaning cartridge with a red plug.

Preparing the Cleaning Solution

1. Open the cleaning tank and pour two sachets of the citric acid cleaning powder into it.

2. Fill the tank with water directly from your Kangen machine. The water type does not matter as it will be neutral pH7 water, perfect for this cleaning process.

3. Securely place the lid back on the tank, ensuring the chunkier side is facing down for a proper fit.

4. Shake the tank vigorously to thoroughly mix the citric acid powder with the water.

Installing the Cleaning Tank

1. Remove the lower section of the machine and the electrolysis enhancer tank, then place the cleaning tank in its position.

2. Proceed with the instructions on your machine, which will guide you to insert the cleaning tank and remove the filter. Ensure both O-rings are present when removing the filter and when installing the cleaning tank.

3. Lock the cleaning tank in place and proceed with the instructions to install the cleaning cartridge and cap the secondary hose.

Starting the Cleaning Cycle

1. Start the cleaning process as directed by your machine. The system will run an internal cycle for 3 hours, utilizing the citric acid solution to decalcify mineral buildup on the electrolysis plates.

2. This is essential for maintaining the machine's performance, as the plates are responsible for the electrolysis process that ionizes your water.

Regular Maintenance Tips

• Monthly Cleaning: For average use, cleaning once a month is recommended. For heavier use, consider cleaning it more frequently, such as fortnightly.

• Daily Beauty Water: Run beauty water for 10 seconds daily to perform a backflush, helping to prevent calcium buildup.

Finishing the Cleaning Process

After the 3-hour cycle, the machine will prompt you to reverse the cleaning process. This includes removing the cleaning cartridge, reinstalling the filter, and ensuring all parts are securely in place. Finally, run the machine to rinse it with water for about 5 minutes, and you're done. You can use the rinse water for your garden as it's just water with a bit of citric acid.

By following these steps, you can ensure your Kangen Water Machine remains in top condition, providing you and your family with clean, ionized water for years to come. Remember, regular maintenance is key to the longevity and performance of your machine.

Happy cleaning!